Search This Supplers Products:Power AdapterLED Power SupplyPower AdapterBattery ChargerMedical Power SupplySwitching Power Supply
Basic certification and requirements for power adapters in different countries and regions
time2007/01/04
- Shenzhen Lianyun Electronic's power adapter products also have international safety and electromagnetic compatibility certifications such as CB, UL, TUV, CCC, SAA, PSE, CE, FCC, etc. The certification is quite comprehensive and indirectly proves its product quality and quality assurance.
Below we will briefly introduce the safety certification required for the sale of power adapters to different regions and countries, as well as the basic introduction of relevant certifications. What certifications do you know about power adapters? Of course, if we evaluate the quality and performance of a power adapter, we can first check whether it has passed the necessary safety certification. Because the safety certification can only be obtained through the certification of an authoritative certification body. In general, the more power supply adapters that are certified, the more secure the quality.
The current power adapters currently sold in China must pass the national mandatory CCC certification. The full name of the 3C certification is "Compulsory Product Certification System", the English name is China Compulsory Certification, the English abbreviation CCC, or 3C for short. It imposes requirements for safety and electromagnetic compatibility on the power supply. For example, 09 information technology CCC certification: GB9254-2008; GB17625. 1-2003; GB4943. 1-2011, it corresponds to IEC/EN/UL60950. 08 video, video products CCC certification: GB13837-2003; GB8898 - 2011; GB17625.1-2003, which corresponds to IEC/EN/UL60065, household appliances CQC certified household and similar electrical appliances safety general requirements: GB4706. 1-2005, corresponding to IEC/EN/UL, Shenzhen Intermodal Electronics The power adapter products pass the 3C certification of these three standards at the same time.
In addition to the 3C certification, the high-quality power supply will also pass the FCC certification. It is a certification for electromagnetic interference, mainly related to the electromagnetic interference generated by the power adapter to shield and eliminate the harm to the human body. For example, if you sell to the Americas and other markets in the Americas, you will definitely need to pass the UL certification. It is also one of the most demanding certifications in the world. It is related to the power adapter in terms of materials, test instruments, structures, and methods. Restrictions and regulations.
The power adapter is sold to Australia and New Zealand and other countries in Australia and needs to pass SAA certification and C-TICK certification. SAA certification is Australia's safety certification, and C-TICK is Australia's certification for electromagnetic interference. The Japanese market must pass the PSE product safety certification, which is a mandatory market access system for Japanese electrical appliances and an important part of the Japanese Electrical Appliances Safety Law. At present, the Japanese government classifies electrical appliances into “specific electrical appliances” and “non-specific electrical appliances” according to the provisions of the Japanese Electrical Appliances Safety Law. The PSE includes both EMC and safety requirements.
The EU is mainly CE certified, and CE-certified products can be sold in EU member states without meeting the requirements of each member state, thus realizing the free circulation of goods within the EU member states. In the EU market, the CE mark is a compulsory certification mark. Whether it is a product produced by an enterprise within the EU or a product produced by another country, in order to freely circulate in the EU market, it must pass CE certification, which is proposed by EU law for products. A mandatory requirement. The most authoritative of these is the CE certification issued by the TUV Rheinland certification body. At the same time, TUV is a certification and testing organization. It can do CE certification and issue CE certificates. At the same time, TUV can do other certifications and tests, such as TUV certification; it is the certificate issued by TUV itself, GS certification. When it comes to GS, we will simply understand the GS. GS is a German safety certification. However, it is a German safety certification, but it is used throughout Europe. GS is a non-mandatory certification, but the degree of recognition is quite high and the relationship with CE is satisfied. GS must comply with CE.
Shenzhen Lianyun Electronic's power adapter products also have CB, UL, TUV, CCC, SAA, PSE, CE, FCC and other international safety and electromagnetic compatibility certification and comply with CEC, MEPS, ERP, CoC, DoE, ROHS environment and energy efficiency directives. The certification is quite comprehensive and indirectly proves the quality of its products and its quality assurance. Shenzhen Lianyunda Electronics provides first-class quality and service to new and old customers with first-class service, good reputation, high-quality products and reasonable price.