Search This Supplers Products:Power AdapterLED Power SupplyPower AdapterBattery ChargerMedical Power SupplySwitching Power Supply
3 teach you to effectively prevent the power adapter from aging
time2006/10/25
- The life of a typical power adapter will be slightly shorter than the life of an electronic product, especially the connection between the power adapter and the electronics.
The service life of a typical power adapter is slightly shorter than the life of an electronic product, especially the connection between the power adapter and the electronic product, and it is a component that has been replaced for a long time. In fact, power adapters are often produced by such manufacturers, and then together with electronic products to send to everyone's hands, then the power adapter and electronic products will have a period of adaptation, is the running-in period. The running-in period is generally 3 days. This period is the necessary process to ensure the stable power supply of the power adapter to the electronic products. You must have heard how long the newly purchased electronic products must be charged for a long time. This is the reason. After the power adapter and electronic products have been used for a long time, the components inside will slowly age down. In the process, everyone can achieve the following three strokes, which can greatly extend the life of the power adapter and prevent the power adapter from aging.
1. Reduce the load during the running-in of the power adapter
In the first 3 days of use, the power adapter must not increase the load with the charging electronic products. During the running-in of the power adapter, you should try not to use any function of the electronic products. For example, in the process of charging a new mobile phone, you must not Frequently check the charge level, chat, watch movies, etc. Everything has to wait until the end of the power adapter run-in period, and then use it after the charge is completed.
2. The power adapter is often powered off during normal use.
Everyone found that the power adapter does not consume a lot of power even if it is not taken down for a long time, so it enters a misunderstanding. After a long time, the power adapter is plugged into the socket and is not pulled out. In fact, this is also the power adapter. The main factor of aging too fast, although the power adapter is plugged into the socket for a long time, it only consumes a few degrees of electricity, which is equivalent to a few dollars, but ignores the feature that the power adapter has been working. As long as the power adapter is plugged into the socket, the components inside include the switching power supply and the power tube are always in working state. Since they are always in working state, they are always in an aging state, so that the life of the power adapter is naturally impossible for a long time. long.
3. The working environment inside and outside the power adapter should be standard.
The working conditions inside the power adapter are related to the electronic products. In the use of the power adapter, do not talk about different types of power adapters for mixing, especially with different brands of electronic products. The power adapter will continue after the electronic product has been run-in period. In the always stable output state, if the electronic product needs to change the output state by accident, it is also one of the factors that cause the power adapter to age.
The working environment outside the power adapter is mainly temperature, humidity, atmospheric pressure and other conditions. The temperature should be kept at room temperature. Do not put the power adapter outdoors. If you have the habit of using the power adapter outdoors, you will find that the power adapter is used. Among them, the calorific value of itself is very high, even hot. At this time, the components inside the power adapter are aging accelerated, which may lead to unpredictable risks such as fire. Humidity is mainly to pay attention to the presence of liquid substances such as beverages and water around the power adapter. The environment with high humidity is also likely to cause aging of the power adapter components. The atmospheric pressure is mainly the case of altitude sickness. It is more difficult to use the power adapter on the plateau, and the power adapter itself will be under high load and increase the degree of aging.
As long as you pay attention to the use of the above 3 tricks, the power adapter is accompanied by electronic products for life, it is very easy to do.